Why do we need a boat lift or trailer lift? Because the typical car or truck lift is just not built to be wide enough to accommodate a boat or trailer. Boat and utility trailers typically are just too wide to fit on a standard auto lift. So until now, boat owners had no alternative. Avoid rust, blemishes, rot, cold damage and more with BendPak’s HD-7500BLX boat storage solution. This is the most cost-effective and safest way to dry dock your boat. BendPak is always in front with innovation and quality. BendPak manufactures some of the most technically advanced automobile lifts in the industry.

Features

7,500-pound lifting capacity
Two different lifting heights to choose from
Electric / hydraulic power system
Internal anti-sway slider blocks in each column
Both models feature heavy-duty 3/8″ aircraft cable
Multi-position safety locks in each column
Optional 4,500-lb. capacity jack available (RJ-45)
Two different ramp lengths to choose
Runways include rail-kit for optional accessories
Single hydraulic cylinder underneath runway
Over-sized self-lubricating cable rollers
Rugged 1-1/4″ roller axles
Adjustable lock ladders
Push-button pneumatic safety release
Durable powder coat finish
TC-3000 Boat Trailer Tongue Platform Standard Accessory

Specifications

Lifting capacity*:7,500 lbs. / 3,402 kg
- *Max capacity / front axle: 3,500 lbs. / 1,701 kg
- *Max capacity / rear axle: 3,500 lbs. / 1,701 kg
Overall width: 132″ / 3,353 mm
Outside length: 198″ / 5,028 mm
Overall length: 224″ / 5,704mm
Height of columns: 100″ / 2,232 mm
Runway min height: 5″ / 125 mm
Max rise: 82″ / 2,083 mm
Max lifting height: 87″ / 2,208 mm
Width between posts: 122″ / 3,099 mm
Runway width: 19″ / 482 mm
Width between runways (narrow setting): 49-1/2″ / 1,257 mm
Width between runways (wide setting): 69-1/2″ / 1,765
Runway centerline (narrow setting): 68-1/2″ / 1,740 mm
Runway centerline (wide setting): 88-1/2″ / 2,248 mm
Outside edge of runways (narrow setting): 87-1/2″ / 2,222 mm
Outside edge of runways (wide setting): 107-1/2″ / 2,730
Drive-thru clearance: 108-1/2″ / 2,756 mm
Length of runways: 188″ / 4,775 mm
Min wheelbase @ rated capacity: 135″ / 3,429 mm
Min wheelbase @ 75% capacity: 115″ / 2,921 mm
Min wheelbase @ 50% capacity: 95″ / 2,413 mm
Min wheelbase @ 25% capacity: 80″ / 2,032 mm
Locking positions: 15
Lock spacing: every 4″ / 102 mm
Lifting time: 50 sec
Motor: 220 VAC / 60 Hz / 1 Ph